Bare Aqua-Trek 1 Women's Drysuit – Small
The Bare Aqua-Trek 1 Women’s Drysuit – Small provides a sealed outer layer for scuba diving, with the construction and equipment details listed below. Match the fit to your intended undergarments so you can move comfortably and use the suit’s inflation and exhaust controls.
Features and Details
- Four-layer Cordura nylon Oxford fabric.
- Replaceable silicone neck and wrist seals.
- Front dry zip.
- Two thigh pockets with attachment points.
- Warm collar with neck drainage.
- M-PADz knee protection.
- Telescoping torso and replaceable crotch strap.
- Four-point braces.
- Drysuit bag included.
How the Features Help
- A complete exposure system: The suit’s sealed outer construction works with separately chosen undergarments. Check the suit and insulation together so the layers do not restrict movement or interfere with the seals.
- Dedicated storage: Thigh pockets keep accessories close to the body. Use the internal attachment points supplied and arrange items so they remain accessible in your usual diving position.
Technical Specs
| Model | Bare Aqua-Trek 1 Women’s Drysuit – Small |
|---|---|
| Material or lining | Four-layer Cordura nylon Oxford fabric. |
| Entry or fastening | Front dry zip. |
| Practical details | Two thigh pockets with attachment points. |
| Supplied | Drysuit bag included. |
Fit and Use
Compare your measurements with the model’s size guide and check the fit wearing the intended base layers, insulation and footwear. Reach overhead, bend and adopt your normal diving position without pulling tightly across the shoulders or crotch. Select the complete insulation system for your conditions, duration and personal needs; use a drysuit with appropriate training and the supplied instructions.
Additional Product Information
This Aqua-Trek 1 drysuit uses a four-layer fabric and front-entry zip. The current listing is for women’s size Small.
Force 1 boots, the 5 mm BARE dry hood and undergarments are optional extras and are not included. Check the complete fit with the intended insulation and footwear.
More About This Model
Lightweight and low-profile front zipper for self-donning
Gear Care and Washing
Rinse the suit’s exterior with fresh water after each dive, paying attention to the zip, valve exteriors and areas that collect salt or sand. Clean the seals and wash the suit only using the method and cleaner approved by the suit manufacturer.
If the inside needs cleaning or has become wet, follow the manual for internal rinsing and drying. Dry the inside and outside completely in a shaded, ventilated place, supporting the suit on a suitable wide drysuit hanger.
Keep the dry zip clean and use only the zip maker’s specified lubricant and application points. Follow its required open or closed position for drying and storage, and avoid bending the zip sharply. Maintain latex, silicone or neoprene seals using the instructions for that exact material.
Do not machine wash, iron, tumble dry or use solvents or strong detergents. Store cool and dry away from sunlight, heaters and ozone sources. Inspect seals, seams, zip and valves before diving and follow the manufacturer’s service schedule.

















Reviews
There are no reviews yet.