The AVATAR Airon Drysuit 102 Ladies provides a sealed outer layer for scuba diving, with the construction and equipment details listed below. Match the fit to your intended undergarments so you can move comfortably and use the suit’s inflation and exhaust controls.
Features and Details
- 260 g/m² membrane fabric with reinforced knees, elbows, seat and crotch.
- Protected front-entry zipper.
- Two technical thigh pockets with bungee loops, wet-note spaces and drainage.
- Additional zipped pockets on the flaps.
- 3 mm neoprene boots with toe/heel protection, fin-strap tabs and ankle straps.
- Apeks inflation and exhaust valves.
- Latex neck seal with neoprene warmer.
- Smart Seals wrist system with latex seals.
- Includes neoprene hood, travel backpack/bag, inflation hose and zipper lubricant.
How the Features Help
- A complete exposure system: The suit’s sealed outer construction works with separately chosen undergarments. Check the suit and insulation together so the layers do not restrict movement or interfere with the seals.
- Dedicated storage: Thigh pockets keep accessories close to the body. Use the internal attachment points supplied and arrange items so they remain accessible in your usual diving position.
Technical Specs
| Model | AVATAR Airon Drysuit 102 Ladies |
|---|---|
| Construction | 3 mm neoprene boots with toe/heel protection, fin-strap tabs and ankle straps. |
| Entry or fastening | Protected front-entry zipper. |
| Practical details | 260 g/m² membrane fabric with reinforced knees, elbows, seat and crotch. |
Fit and Use
Compare your measurements with the model’s size guide and check the fit wearing the intended base layers, insulation and footwear. Reach overhead, bend and adopt your normal diving position without pulling tightly across the shoulders or crotch. Select the complete insulation system for your conditions, duration and personal needs; use a drysuit with appropriate training and the supplied instructions.
Additional Product Information
The women’s Airon 102 uses a four-layer nylon membrane fabric with reinforcement at wear areas. Its telescopic torso, internal suspenders and crotch strap help position the suit over suitable insulation.
Select the suit and boot size to accommodate your chosen undersuit. Use the manufacturer’s instructions for seals, valves, zipper care and training requirements.
More About This Model
Additional reinforcements on knees, elbows, and a specially designed crotch patch for increased durability and abrasion prevention.
Unique design with sublimations and a special pocket design for increased visibility while diving.
SUIT COMPONENTS: BOOTS: The drysuit is equipped with modern, comfortable waterproof boots made of 3-millimeter neoprene. The inside is reinforced with an additional insole, while the outside features a rubber toe and heel guard. The boots have a fin strap tab and an ankle strap to prevent excess air from collecting. The boot sizes are matched to the drysuit sizes and accommodate warm thermal liners or extra pairs of diving socks.
FINISHING: The Avatar Airon is reinforced at the knees, crotch, elbows, and buttocks with 280 g/m2 fabric for added protection. The water-reducing plastic front zipper is covered with a pleat for protection against sand or dirt. The latex seal is shielded by a neoprene warmer, which also overlaps the neoprene hood collar. Inside the drysuit are original orange suspenders to keep the suit in place after the undersuit is worn.
Gear Care and Washing
Rinse the suit’s exterior with fresh water after each dive, paying attention to the zip, valve exteriors and areas that collect salt or sand. Clean the seals and wash the suit only using the method and cleaner approved by the suit manufacturer.
If the inside needs cleaning or has become wet, follow the manual for internal rinsing and drying. Dry the inside and outside completely in a shaded, ventilated place, supporting the suit on a suitable wide drysuit hanger.
Keep the dry zip clean and use only the zip maker’s specified lubricant and application points. Follow its required open or closed position for drying and storage, and avoid bending the zip sharply. Maintain latex, silicone or neoprene seals using the instructions for that exact material.
Do not machine wash, iron, tumble dry or use solvents or strong detergents. Store cool and dry away from sunlight, heaters and ozone sources. Inspect seals, seams, zip and valves before diving and follow the manufacturer’s service schedule.


