The Waterproof D3 Ergo men’s drysuit is built around lightweight, flexible trilaminate fabric and a streamlined fit. It is a useful choice when freedom of movement and manageable packing weight are priorities, with replaceable silicone seals, practical pockets and reinforced knees for regular scuba diving.
Features and benefits
- Lightweight trilaminate shell: the soft three-layer fabric provides the dry barrier while allowing you to choose undergarments for the water conditions. The shaped torso and limbs reduce unnecessary bulk.
- YKK plastic back dry zip: a flexible main closure sits across the back. Keep the sealing surfaces clean and check that the zip is fully closed before diving.
- Lightweight leg pockets: two accessible pockets carry suitable essentials without adding heavy external storage.
- Reinforced knees: Kevlar knee areas resist abrasion and have pockets for optional protective padding.
- Soft boots and a grippy seat: the lightweight boots reduce bulk around the feet, while the seat treatment helps prevent slipping when seated on a boat.
- Replaceable silicone seals: the SI TECH Quick Neck and QCS wrist rings retain the seals mechanically, allowing compatible worn or damaged seals to be replaced without gluing a new seal directly to the suit.
- Warm Neck and Warm Cuffs: outer neoprene covers reduce water movement around the neck and wrists and help protect the seals. The cuffs can be detached when your setup requires it.
- SI TECH valves: a swivelling inlet lets the inflation hose sit conveniently; the adjustable automatic exhaust controls release of suit gas during a properly managed ascent.
What is included
The suit is supplied with SI TECH valves, a low-pressure inflation hose, a Waterproof carry bag, suspenders and a spare silicone seal kit. A seal tool is included.
Dry-glove compatibility
The fitted neck and wrist systems accept specific replacement seals. Original Ultima/standard Ultima Twist compatibility depends on the wrist-ring size: larger rings on 3XL and 3XL/t+ suits do not accept the standard system directly. Confirm the ring system before buying dry gloves.
Technical Specs
| Model | D3 Ergo men’s drysuit |
|---|---|
| Shell | Lightweight flexible trilaminate |
| Main closure | YKK plastic back dry zip |
| Neck system | SI TECH Quick Neck with silicone seal |
| Wrist system | SI TECH QCS rings with silicone seals |
| Storage | Two lightweight leg pockets |
| Valves | SI TECH swivelling inlet and adjustable automatic exhaust |
| Colour | Black/green |
| Reference weight | 4.1kg for men’s size M; varies by size |
Fit and use
Choose your size with the intended undergarments on and check that you can reach your valves, bend your knees and bring your arms across your chest. Boot fit and seal fit also matter. Drysuit training, correct inflation and venting, and checks before every dive are essential. Ask our Hallam team if you need help with sizing or compatibility.
More About This Model
The D3 Ergo is equipped with soft, flexible neoprene boots, SI TECH Quick Neck System and Warm Neck, SI TECH QCS Oval Ring System and Warm Cuffs, Silicone seals for neck and wrists, a plastic dryzipper, light pockets with loops inside and SI TECH valves. The whole suite with valves, boots, seals and suspenders weighs only 4.1 kg (in men’s medium).
ANATOMICAL FIT – All critical parts concerning mobility, like torso, pre-bent arms and legs have been anatomically designed to enhance the freedom of movement.
WARM NECK – The neck is equipped with super-stretch neoprene collar that minimize heat loss.
BOOTS – Xlite flexboot, soft, light and flexible boot with fin strap ridge and a narrow fit.
MOLDED VELCRO TABS – TPE tab with moulded Velcro hooks, for adjusting the Warm Cuffs, sticks only to the assigned Velcro part.
Gear Care and Washing
Rinse the suit’s exterior with fresh water after each dive, paying attention to the zip, valve exteriors and areas that collect salt or sand. Clean the seals and wash the suit only using the method and cleaner approved by the suit manufacturer.
If the inside needs cleaning or has become wet, follow the manual for internal rinsing and drying. Dry the inside and outside completely in a shaded, ventilated place, supporting the suit on a suitable wide drysuit hanger.
Keep the dry zip clean and use only the zip maker’s specified lubricant and application points. Follow its required open or closed position for drying and storage, and avoid bending the zip sharply. Maintain latex, silicone or neoprene seals using the instructions for that exact material.
Do not machine wash, iron, tumble dry or use solvents or strong detergents. Store cool and dry away from sunlight, heaters and ozone sources. Inspect seals, seams, zip and valves before diving and follow the manufacturer’s service schedule.
Ordering information
Special-order product, with an estimated 3–6 week lead time. Confirm your size and current availability before ordering.
























