The Waterproof D10 Pro ISS men’s drysuit combines high-density 3.5mm CR neoprene with replaceable silicone seals. The neoprene shell contributes insulation as well as the dry barrier, while the shaped cut, reinforced boots and expandable pockets suit divers wanting a robust suit for regular use.
Features and benefits
- 3.5mm high-density CR neoprene: the dense material provides a close-fitting insulating shell. ToughTex outer lining adds resistance to abrasion without relying on a thick, bulky suit.
- Integrated Silicone Seal system: compatible neck and wrist seals are retained in rings so they can be replaced when worn or damaged. Check the installed ring type before ordering replacements or dry gloves.
- Back dry zip: the main closure provides rear entry, with a protective cover and an inner guard to keep clothing clear during closure.
- Warm Neck collar: the outer neoprene neck cover helps reduce water movement around the seal. Moulded hook-and-loop tabs let you adjust its position.
- Two expandable pockets: neoprene storage with internal D-rings carries suitable dive accessories. Large zip pullers make the pockets easier to operate with gloves.
- Protection at contact points: padded shoulders, shaped rubber knee pads, a polyurethane-reinforced back and Kevlar-reinforced boots help resist repeated wear.
- Visible details: reflective logos on the neck and sleeves provide reflective points when illuminated.
What is included
Supplied with valves, a low-pressure inflation hose, suspenders, a spare silicone seal kit and a Waterproof carry bag that can be carried as a backpack.
Seal and dry-glove fit
Confirm the exact neck and wrist-ring configuration before selecting spare seals or a dry-glove system. Larger wrist rings used on some 3XL/t+ suits need a different glove interface.
Technical specifications
| Model | D10 Pro ISS men’s drysuit |
|---|---|
| Shell | 3.5mm high-density CR neoprene |
| Outer lining | ToughTex |
| Entry | Back dry zip |
| Seals | Replaceable silicone neck and wrist seals |
| Pockets | Two expandable neoprene pockets with D-rings |
| Boots | Kevlar reinforced |
Fit and use
Choose your size with the intended undergarments on and check that you can reach your valves, bend your knees and bring your arms across your chest. Boot fit and seal fit also matter. Drysuit training, correct inflation and venting, and checks before every dive are essential. Ask our Hallam team if you need help with sizing or compatibility.
Care
Rinse the exterior after use, keep sand and grit out of the valves and dry zip, and dry fully before storage. Protect the silicone seals from sharp nails and jewellery. Use the lubricant specified for the fitted zip and follow the Waterproof drysuit manual for cleaning, storage and servicing.
Ordering information
Some sizes may require special ordering. Contact Dive Gear Australia for the available size and delivery timing.




