D10 Pro ISS Female Drysuit

D10 Pro ISS Female Drysuit

The D10 Pro ISS Female Drysuit provides a sealed outer layer for scuba diving, with the construction and equipment details listed below. Match the fit to your intended undergarments so you can move comfortably and use the suit’s inflation and exhaust controls.

Features and Details

• 3.5mm high-density CR neoprene: the dense material provides a close-fitting insulating shell. ToughTex outer lining adds resistance to abrasion without relying on a thick, bulky suit.
• Integrated Silicone Seal system: compatible neck and wrist seals are retained in rings so they can be replaced when worn or damaged. Check the installed ring type before ordering replacements or dry gloves.
• Back dry zip: the main closure provides rear entry, with a protective cover and an inner guard to keep clothing clear during closure.
• Warm Neck collar: the outer neoprene neck cover helps reduce water movement around the seal. Moulded hook-and-loop tabs let you adjust its position.
• Two expandable pockets: neoprene storage with internal D-rings carries suitable dive accessories. Large zip pullers make the pockets easier to operate with gloves.
• Protection at contact points: padded shoulders, shaped rubber knee pads, a polyurethane-reinforced back and Kevlar-reinforced boots help resist repeated wear.
• Visible details: reflective logos on the neck and sleeves provide reflective points when illuminated.

How the Features Help

• A complete exposure system: The suit’s sealed outer construction works with separately chosen undergarments. Check the suit and insulation together so the layers do not restrict movement or interfere with the seals.
• Dedicated storage: Thigh pockets keep accessories close to the body. Use the internal attachment points supplied and arrange items so they remain accessible in your usual diving position.

Technical Specs

Fit and Use

Compare your measurements with the model’s size guide and check the fit wearing the intended base layers, insulation and footwear. Reach overhead, bend and adopt your normal diving position without pulling tightly across the shoulders or crotch. Select the complete insulation system for your conditions, duration and personal needs; use a drysuit with appropriate training and the supplied instructions.

Additional Product Information

The Waterproof D10 Pro ISS women’s drysuit combines high-density 3.5mm CR neoprene with replaceable silicone seals. The neoprene shell contributes insulation as well as the dry barrier, while the shaped cut, reinforced boots and expandable pockets suit divers wanting a robust suit for regular use.

Supplied with valves, a low-pressure inflation hose, suspenders, a spare silicone seal kit and a Waterproof carry bag that can be carried as a backpack.

Confirm the exact neck and wrist-ring configuration before selecting spare seals or a dry-glove system. Larger wrist rings used on some 3XL/t+ suits need a different glove interface.

Choose your size with the intended undergarments on and check that you can reach your valves, bend your knees and bring your arms across your chest. Boot fit and seal fit also matter. Drysuit training, correct inflation and venting, and checks before every dive are essential. Ask our Hallam team if you need help with sizing or compatibility.

Rinse the exterior after use, keep sand and grit out of the valves and dry zip, and dry fully before storage. Protect the silicone seals from sharp nails and jewellery. Use the lubricant specified for the fitted zip and follow the Waterproof drysuit manual for cleaning, storage and servicing.

Some sizes may require special ordering. Contact Dive Gear Australia for the available size and delivery timing.

More About This Model

CHILL GUARD – Keeps your body heat in and your undergarments out of the zipper for trouble-free operation.

KNEE GUARDS – Anatomically shaped, 3D knee/shin guard for hardcore protection without compromising comfort and flexibility.

Gear Care and Washing

Rinse the suit’s exterior with fresh water after each dive, paying attention to the zip, valve exteriors and areas that collect salt or sand. Clean the seals and wash the suit only using the method and cleaner approved by the suit manufacturer.

If the inside needs cleaning or has become wet, follow the manual for internal rinsing and drying. Dry the inside and outside completely in a shaded, ventilated place, supporting the suit on a suitable wide drysuit hanger.

Keep the dry zip clean and use only the zip maker’s specified lubricant and application points. Follow its required open or closed position for drying and storage, and avoid bending the zip sharply. Maintain latex, silicone or neoprene seals using the instructions for that exact material.

Do not machine wash, iron, tumble dry or use solvents or strong detergents. Store cool and dry away from sunlight, heaters and ozone sources. Inspect seals, seams, zip and valves before diving and follow the manufacturer’s service schedule.