Waterproof H2 Hood Bibbed 5/7mm

The Waterproof H2 5/7mm bibbed hood combines an anatomical neoprene shape with extra insulation in key areas and a vent system for trapped air. The extended bib overlaps the suit around the neck and upper shoulders.

Features and benefits

• 5/7mm insulation layout: 7mm double-layer areas cover key heat-loss zones, with 5mm material in the remaining construction. This concentrates warmth while preserving a shaped fit.
• HAVS air venting: the Hood Air Venting System uses one-way valves to release air that collects inside the hood, helping prevent an uncomfortable air pocket at the top.
• Glideskin sealing surfaces: smooth areas around the face and neck help limit flushing when the hood fits correctly and meets the suit collar neatly.
• Anatomical panels and stretch nylon: the three-dimensional shape follows the head, and the stretch outer textile helps the hood move as you turn and look around.
• Bonded nylon stitching: quality thread supports the panel joins through repeated dressing and use.
• EXTEND lining and reflective detail: the inner lining adds a soft feel, while the reflective logo provides a reflective point when illuminated.

Technical Specs

Fit and use

Choose a close, comfortable fit without restricting head movement or pressing uncomfortably on the jaw. Check the mask skirt, face opening and overlap with the suit collar together. Hood thickness alone does not establish a suitable temperature or dive duration.

Gear Care and Washing

Rinse inside and out in cool fresh water after every use to remove salt, chlorine, sand and residue. Gently hand wash when needed with mild soap or a cleaner specifically authorised by Waterproof, following the garment label, then rinse thoroughly.

Keep any vent openings clear and settle face and neck seals gently when dressing. Dry the lining and inside of the hood fully before storage.

Allow both sides to dry completely in the shade with good airflow. Store clean and dry away from direct sunlight, heaters and hot cars. Avoid crushing the neoprene or leaving it folded sharply for long periods.

Protect smooth seals and coatings from fingernails, jewellery and scrubbing. Rinse any zip or fastener free of grit, and use only the maker’s approved lubricant where required. Do not machine wash, tumble dry, iron, bleach or use solvents.