OceanPro rubber BCD inflator hose with quick disconnect
Replace a worn inflator hose or choose a more suitable route with this OceanPro rubber BCD hose. It supplies a matching power inflator from the appropriate low-pressure regulator connection, with a quick-disconnect fitting at the inflator end.
The rubber hose and chrome-plated brass fittings provide a conventional replacement option. Select the required length from the available options, allowing enough movement for normal use without pulling on the inflator or leaving a large loose loop.
Check both end connections against your first stage and inflator before ordering. Inflator couplings are not all identical, and an alternate-air inflator may require a different hose connection. Ask DGA to match the hose if you are unsure of your equipment.
A known matching spare is useful for longer trips where service assistance is available. Have a qualified technician install and function-check the hose. Keep a stored spare clean with its ends protected, and inspect the installed hose and coupling as part of your normal pre-dive checks.


Reviews
There are no reviews yet.