Enth Degree ODYSSEY Dive Boots

Enth Degree ODYSSEY Dive Boots

The Enth Degree ODYSSEY Dive Boots provide practical foot coverage for diving and watersports. Choose this model for its listed upper, sole and entry design, and check the complete fit with your fins or drysuit socks before ordering.

Features and Details

• Reinforced pull tab and rear seam reduce strain on neoprene when donning
• 5mm double-glued and blind-stitched neoprene construction for longevity and reduced water flow
• Durable moulded sole with non-slip tread, arch support and stress-reducing heel air bubble
• Velcro® zipper flap helps keep the zip closed during the dive

How the Features Help

• Underfoot support: The sole provides a contact surface between your foot and the ground. Its thickness, tread and stiffness affect walking comfort and how the boot fits inside an open-heel fin.
• Entry opening: A zip opens the upper to help guide your foot in and out. Open it fully when changing and clear sand from the track rather than forcing the slider.

Technical Specs

Fit and Use

Measure both feet using the wall method: stand with your heel against a wall, mark the longest toe and measure the distance in centimetres. Compare the longer foot with the model’s size guide, then try the footwear with your intended socks and fins. Lycra fin socks can help reduce rubbing inside dive boots; allow space for any thicker neoprene socks or drysuit socks.

Additional Product Information

The Odyssey Boot from Enth Degree is the choice for any scuba diver looking for protection and comfort. Constructed with 5mm double-glued and blind-stitched neoprene, this boot provides neoprene insulation and protection for diving use. The sole is moulded with a non-slip tread, arch support, and a stress-reducing heel air bubble for comfort. The reinforced pull tab and rear seam reduce strain on the neoprene when donning the boot, and the Velcro® zipper flap ensures that the zipper stays secure during the dive.

This boot is ideal for cold water dives, providing thermal protection and keeping your feet warm and comfortable. The non-slip sole is for navigating rocky or slippery surfaces, while the air bubble and arch support will reduce fatigue on long dives. Whether you’re exploring a shipwreck or searching for a rare fish species, the Odyssey Boot from Enth Degree provides a practical layer for diving.

Gear Care and Washing

Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash or Revivex Wetsuit Shampoo for compatible neoprene. Regular cleaning helps remove salt, chlorine and everyday residue and, together with thorough drying and proper storage, helps extend your gear’s life. Use the label dilution and follow this product’s care instructions.

Rinse inside and out in cool fresh water after every use to remove salt, chlorine, sand and residue. Gently hand wash when needed with a material-compatible wetsuit cleaner at its specified dilution, following the garment label, then rinse thoroughly.

Clear sand from the soles, zip and foot opening. Open the entry fully and dry the inside as well as the upper; remove an insole only if it is designed to be removable.

Allow both sides to dry completely in the shade with good airflow. Store clean and dry away from direct sunlight, heaters and hot cars. Avoid crushing the neoprene or leaving it folded sharply for long periods.

Protect smooth seals and coatings from fingernails, jewellery and scrubbing. Rinse any zip or fastener free of grit, and use only the maker’s approved lubricant where required. Do not machine wash, tumble dry, iron, bleach or use solvents.