Cressi Aquawing Plus BCD Size Chart
How to measure your Cressi BCD
- Ask someone to help. Stand upright, look forward and keep your feet flat on the floor. Use a soft tape held close to the body without pulling it tight.
- Chest: measure around your torso just below the arms.
- Waist: measure around your natural waist between your ribs and hips.
- Check the BCD over the exposure suit and layers you will dive in. Adjust the shoulder and waist straps, then check that you can breathe and move comfortably with the BCD inflated.
Cressi recommends allowing about 5 cm of additional waist room for suits thicker than 5 mm. Ask us to confirm fit for your exposure suit.
Manufacturer: Cressi BCD measuring diagram. Use the table for the exact model.
| Harness | Chest (cm) | Waist (cm) | Weight (kg) |
|---|---|---|---|
|
One adjustable size (XS–XL)
|
80-130
|
75-130
|
55-125
|
Cressi Aquawing Plus BCD – Wing-Style
$1,299.95 inc. GST
The Cressi Aquawing Plus BCD combines a single-cylinder donut wing with an aluminium backplate and adjustable MAS harness. Integrated release pockets, rear trim pockets and Air-Net padding support a complete recreational setup. An SMB pocket and stainless-steel D-rings provide accessory storage.
2 in stock
Cressi Aquawing Plus single-cylinder back-inflation BCD
The Aquawing Plus combines a donut-shaped wing with an aluminium backplate and Cressi’s MAS adjustable harness. The continuous webbing system accommodates a broad fit range while retaining padding and integrated weight storage.
- Single-cylinder back-inflation design.
- MAS harness with a nominal XS–XL adjustment range.
- Listed lift capacity: 12kg, approximately 27lb.
- Anodised aluminium backplate.
- Thermoplastic-rubber cylinder grip.
- Air-Net shoulder and back padding.
- Two quick-release main weight pockets.
- Two rear trim-weight pockets.
- Quick-release crotch strap.
- Four pre-bent stainless-steel D-rings.
- Dedicated SMB storage pocket.
- Shoulder pull-dump arrangement.
Match lift, ballast and harness adjustment to your complete diving configuration. The optional 2.5kg backplate weight bar is sold separately. The single-cylinder design and integrated storage make this a practical choice for divers seeking a wing-style recreational setup.
Specifications
Lift and dry weight can vary by size and configuration. “Not confirmed” means a reliable figure is not yet available for this model.
| BCD model / configuration | Cressi Aquawing Plus |
|---|---|
| BCD style | Backplate and donut wing |
| Fit / gender | Unisex |
| Lift capacity | 12.2 kg (120 N; 26.9 lb) |
| Product weight | 3.75 kg |
| Integrated weights | Yes |
| Ditchable weight capacity | 2 × 3 kg pockets (6 kg total) |
| Tank configuration | Single back-mounted cylinder |
| Brand | Cressi |
| Integrated weight pockets | 2 quick-release pockets |
| Trim weight pockets | 2 cylinder-band pockets |
| Air bladder material | 210D nylon |
| Bladder cover | 1500D Cordura |
| Tank band | 2 cylinder bands |
| Harness | MAS continuous-webbing harness with Air-Net padding |
| Size / adjustment | One size, adjustable XS–XL |
| Backplate | Anodised aluminium |
| D-rings | 4 pre-bent stainless steel |
| Crotch strap | Quick release |
| SMB pocket | Yes — dedicated pocket |
| Specification notes | Catalogue check: Cressi 2027 Scuba Diving Buyer's Guide, pp. 105, 124. |
Sources: Cressi Aquawing Plus
Specifications checked: 2026-09-23
We dispatch orders five days a week, usually within 1–3 days. Standard mainland Australian shipping is $20. Click & Collect from our Hallam store is free once your order is ready.
- Large or bulky gear: additional freight charges apply on top of standard shipping: large dive bags $30; long freediving fins $15; long spearguns $20. Scuba tank freight is shown at checkout.
- Rural, remote & offshore: rural means anywhere outside metropolitan areas. Carrier availability and additional charges may apply, including for island and territory destinations. Our team will contact you if an extra freight quote is needed.
The available delivery rate for your order is shown at checkout.
We offer a 30-day exchange on most unused products within Australia when they are in saleable condition with their original packaging and accessories. Please contact us with your order number before returning an item. Change-of-mind refunds are not offered; this does not limit your rights for faulty products under Australian Consumer Law.
FREE CLICK & COLLECT
Usually ready same day*
Select local pickup at checkout. We will email you when your order is ready. Please wait for your ready-to-collect confirmation before visiting, then bring your confirmation email and photo ID.
Collect from our Hallam store
Factory 4 / 56–60 Hallam South Rd
Hallam VIC 3803
*For items in stock at our Hallam store during opening hours, subject to order processing. Available-to-order and special-order items take longer. Collection is unavailable while the store is closed.
Can I collect my order from the store?
Yes. Choose free local pickup at checkout and wait for your ready-to-collect email before visiting our Hallam store. Bring your confirmation and photo ID. See Click & Collect details.
How do I choose the right size?
Use the product's size chart where available and compare your measurements with the guide for that brand. Sizing varies between brands and products. If you are unsure, contact our team before ordering and we can help you choose.
How do I check availability?
Select your required options, such as colour and size, to see availability for that variation. If an item is marked “Available to order”, check the estimated dispatch information. Please contact us before ordering if you need gear by a particular date.
When will my order be dispatched?
Orders are usually dispatched within 1–3 days, subject to stock availability. Available-to-order and special-order products may take longer. Delivery time is separate from dispatch time and depends on your location and the carrier. Read our shipping information.
Can I exchange an item if it does not fit?
We offer a 30-day exchange policy on most unused products within Australia, subject to eligibility. Contact us with your order number before returning an item. Read the exchange conditions and next steps.
Can you help me choose the right gear?
Yes. Call 03 9702 3694 during store hours or email [email protected]. Tell us which product you are considering and how you plan to use it.
Similar products
View all Rear Inflate BCD
