OceanPro Torquay II F300 Regulator Set
The Torquay II and F300 pair a balanced diaphragm first stage with an adjustable second stage. Dynamic Adjustment lets you change the breathing feel, while the front cover is shaped to reduce the direct effect of water movement on the diaphragm.
Features and benefits
- Balanced diaphragm first stage. The balanced mechanism regulates the supply to the second stage as cylinder pressure falls, helping keep the breathing response consistent through the dive.
- Dynamic Adjustment. The second-stage control changes inhalation effort so you can adjust the breathing feel within the regulator’s operating range.
- Flexible breathing hose. The braided hose bends readily around your equipment, helping reduce tension at the second-stage connection.
- Surge-deflecting cover. The front cover redirects moving water across the diaphragm, helping reduce unwanted valve opening when facing a current.
Setup and compatibility
Connection: DIN, Yoke. Choose the fitting that matches your cylinder valve and its pressure rating.
Care, rinsing and storage
After each dive, connect the assembled regulator to a scuba cylinder and open the valve to pressurise the system. Keep it pressurised while fully submerging the first stage, second stages and connected hoses in fresh water. This allows thorough cleaning of the exposed components and hoses while helping prevent water entering the internal air passages, where it can cause corrosion and damage. Keep the cylinder secure throughout cleaning.
For routine cleaning, Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash Neoprene Cleaner 500 mL or Revivex Wetsuit Shampoo 10 oz to help remove salt, chlorine and everyday residue. Dilute according to the cleaner’s label, then rinse thoroughly with fresh water.
Keep the regulator pressurised throughout washing and rinsing. Lift it out of the water and dry the first stage and cylinder connection before closing the cylinder valve, releasing the pressure and disconnecting. Fit the clean, dry dust cap, then allow the regulator to dry in the shade. Store it with the hoses loosely curved, without sharp bends or tension.
Before each dive, inspect the mouthpiece, hoses and connections for wear or damage. Have your regulator serviced by an authorised OceanPro technician at the interval specified in its manual, or sooner if it leaks, is damaged or its breathing performance changes. Leave internal adjustments and repairs to a qualified technician.




Reviews
There are no reviews yet.