Hollis HD 200 Tech/Rec BCD

Hollis HD 200 Tech/Rec BCD

The HD-200 combines a supportive recreational harness with a durable back-inflation layout. Lumbar padding, quick-release integrated weights and a substantial waist strap make it a useful option for divers carrying a well-equipped single-cylinder setup.

Features and benefits

• Harness support. The contoured backpack and lumbar padding spread support across your back. Adjust the straps over your exposure suit to hold the cylinder securely without restricting shoulder movement.
• Accessible weight handling. Pinch-and-pull releases let you remove ballast from the integrated pockets when needed. Check that the pockets are fully engaged after loading, and keep both release handles accessible.
• Durable construction. Construction uses 1000D Cordura with PU lamination. The fabric protects the buoyancy structure from everyday contact with equipment; rinse it after use and inspect high-wear areas regularly.
• Rear trim pockets. Separate rear pockets let you position some ballast near the cylinder to adjust trim. Distinguish this ballast from the quick-release weights when planning your configuration.
• Quick-release crotch strap. The crotch strap limits upward movement of the BCD, while its buckle makes the fitted system easier to put on and remove.

Fit and configuration

Select the appropriate size or harness adjustment for your body and exposure suit. Choose enough lift for your complete cylinder and equipment configuration. Lift capacity, ballast-pocket capacity and the BCD’s dry weight describe different things; use the size-specific values in Technical Specs when comparing options.

Product media

Care, rinsing and storage

After every dive, rinse the BCD, harness, buckles and accessible fittings with fresh water, paying attention to salt and sand around the inflator, dump valves and weight-pocket releases. Follow the Hollis manual’s procedure for the fitted inflation system, including keeping the power inflator pressurised where specified.

Dive Gear Australia recommends Gear Aid Revivex BC Cleaner 10 oz for cleaning the outer surfaces and internal air cell. It helps remove salt, chlorine and residue while conditioning suitable rubber and plastic parts. Use the dilution on the cleaner’s label and follow the equipment manual.

Rinse the air cell internally through the opening specified in the manual, using fresh water and the recommended cleaner dilution when needed. Gently rotate the equipment to reach the inside surfaces, drain through the specified outlet, then rinse until the water runs clear. Drain thoroughly before drying.

Allow the BCD to dry in the shade, then store it slightly inflated in a cool, dry place without tight folds or heavy gear on top. Before diving, check that it holds air and that inflation controls, dump valves, straps and weight releases work correctly. Follow the manufacturer’s service schedule and have leaks, sticking controls or damage checked by an authorised technician.