Cressi Mini Spg Vale 300 C Console
The Cressi Mini SPG Vale 300 C combines a compact pressure gauge with a textured rubber boot and an included HP hose. Choose the black or white face to suit your preferred display, then secure the console within easy reach on your regulator setup.
Features and benefits
- Colour-coded pressure reference. Red, yellow and green dial areas help you identify the part of the scale the pointer is in. Use your planned turn and reserve pressures for the dive; the colours do not set a safe gas reserve for every situation.
- Protected brass gauge. The chrome-plated brass case sits inside a rubber boot, adding protection during routine handling.
- Textured grip. The boot’s surface helps you hold and orient the small console when checking pressure.
- Upper attachment loop. A suitable clip or bungee can hold the gauge close to your equipment while allowing you to bring it into view.
Setup and compatibility
The assembly includes the protective boot and high-pressure hose. Select the required dial-face option before ordering. The pressure scale reads to 350 bar; confirm the permitted working pressure for the complete regulator system. A qualified technician should fit and check the HP connection, leaving enough hose movement to read the dial without pulling on its fittings.
Care, rinsing and storage
After each dive, rinse the gauge and hose thoroughly with fresh water. Keep the complete regulator assembled, connected to a secured dive cylinder and pressurised while washing and rinsing, with the stages, gauge and connected hoses submerged. This helps keep water out of the pressure system. Lift the equipment out and dry the cylinder connection before depressurising and disconnecting; fit the first stage’s clean, dry dust cap.
Let the equipment dry in the shade, then store it with the hose in a relaxed curve. Protect the instrument from impacts and avoid lifting the regulator or cylinder by the gauge hose. Before diving, inspect the lens, hose and fittings, check for leaks and confirm that the needle responds normally and returns to zero when fully depressurised. Have damage, internal moisture or an unreliable reading checked by an authorised technician.






Reviews
There are no reviews yet.