Aqualung Helix Regulator Set Yoke W/Spg & Case
The Helix combines a balanced first stage and pneumatically balanced second stage in a straightforward recreational setup. Preset inhalation resistance keeps the controls simple, while a Venturi switch gives you a useful adjustment for surface handling and the dive.
Features and benefits
- Balanced diaphragm first stage. The balanced mechanism regulates the supply to the second stage as cylinder pressure falls, helping keep the breathing response consistent through the dive.
- Balanced second stage. Pneumatic balancing reduces the force needed to open the demand valve, helping the second stage respond smoothly as you inhale.
- Venturi control. The lever changes airflow assistance inside the second stage. Use the pre-dive setting for surface handling and the dive setting as directed in the manual.
- Comfo-Bite mouthpiece. The silicone palate bridge supports the second stage with less need to clench your jaw, which can make longer dives more comfortable.
- T-shaped first stage. The body positions instrument and supply hoses around the cylinder, helping keep the assembled setup organised.
- Pressure and temperature at a glance. The included SPG combines a pressure scale and temperature indication. Its luminescent face can be charged with a dive torch for low-light reading, while the protective boot cushions everyday knocks.
- Alternate and carry case included. The package brings together the regulator, alternate second stage, pressure gauge and case for a coordinated setup and protected transport.
Setup and compatibility
Connection: Yoke. Choose the fitting that matches your cylinder valve and its pressure rating.
The listed set includes the regulator, alternate second stage, SPG and carry case. This listing uses the cylinder connection stated above.
Care, rinsing and storage
After each dive, connect the assembled regulator to a scuba cylinder and open the valve to pressurise the system. Keep it pressurised while fully submerging the first stage, second stages and connected hoses in fresh water. This allows thorough cleaning of the exposed components and hoses while helping prevent water entering the internal air passages, where it can cause corrosion and damage. Keep the cylinder secure throughout cleaning.
For routine cleaning, Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash Neoprene Cleaner 500 mL or Revivex Wetsuit Shampoo 10 oz to help remove salt, chlorine and everyday residue. Dilute according to the cleaner’s label, then rinse thoroughly with fresh water.
Keep the regulator pressurised throughout washing and rinsing. Lift it out of the water and dry the first stage and cylinder connection before closing the cylinder valve, releasing the pressure and disconnecting. Fit the clean, dry dust cap, then allow the regulator to dry in the shade. Store it with the hoses loosely curved, without sharp bends or tension.
Before each dive, inspect the mouthpiece, hoses and connections for wear or damage. Have your regulator serviced by an authorised Aqualung technician at the interval specified in its manual, or sooner if it leaks, is damaged or its breathing performance changes. Leave internal adjustments and repairs to a qualified technician.










Reviews
There are no reviews yet.