Waterproof O1 Neoflex Overvest 5/7mm Women's
Add core and head insulation to your existing wetsuit with the Waterproof O1 Neoflex women’s hooded overvest. Its 5mm body and fixed 7mm hood provide extra coverage for cooler dives, while the flexible front-zip design makes it easier to layer over your main suit.
Features and benefits
- 5mm Neoflex body: four-way stretch microcell limestone CR neoprene lets the overvest follow the suit beneath it. Glued and blind-stitched seams help reduce water exchange.
- Fixed 7mm hood: double-layer protection in key areas adds warmth around the head. The Glideskin face seal sits smoothly against the skin and should be checked with your mask.
- HAVS venting: the Hood Air Venting System uses one-way valves to let trapped air escape, reducing the air pocket that can collect at the top of a hood.
- Inverted front zip: the YKK #10 Vislon zip finishes at the chest, leaving the face seal clear of the zip and giving your head more comfortable movement. The EasyGrip puller helps operation with gloves.
- EXTEND thermal lining: a soft, stretchy inner layer adds comfort when worn over the wetsuit.
- Detachable beavertail: double hook-and-loop fasteners help keep the vest from riding up. Remove the tail when the setup calls for it.
- Equipment grip: polyurethane surfaces at the shoulders and waist help keep BCD straps and a weight belt in position.
Technical Specs
| Model | O1 Neoflex women’s overvest |
|---|---|
| Body thickness | 5mm |
| Attached hood | 7mm with HAVS one-way air vents |
| Material | Microcell limestone CR neoprene |
| Lining | EXTEND stretch thermal lining |
| Entry | Inverted YKK #10 Vislon front zip |
| Retention | Detachable beavertail with double fasteners |
| Intended position | Over an existing wetsuit |
Fit and use
Fit the O1 over the wetsuit you will actually use. Check shoulder movement, the neck and mask seal, and BCD and weight-belt adjustment with both layers in place. Added neoprene changes the buoyancy of your setup.
More About This Model
The O1 vest has a detachable beaver tail with double Velcro locks. Thermal lining adds a softer, warmer and more comfortable feel. Anti-slip surfaces at the shoulders and waist keep the BCD and weight belt in place.
SEAMS – Glued and blind stitched with bonded nylon thread.
FRONT ZIP – High-quality YKK #10 Vislon zipper with corrosion free slider. The inverted front zipper ends on the chest to create a comfortable and tight face seal and makes it easier to move the head.
Gear Care and Washing
Rinse inside and out in cool fresh water after every use to remove salt, chlorine, sand and residue. Gently hand wash when needed with mild soap or a cleaner specifically authorised by Waterproof, following the garment label, then rinse thoroughly.
Keep any vent openings clear and settle face and neck seals gently when dressing. Dry the lining and inside of the hood fully before storage.
Allow both sides to dry completely in the shade with good airflow. Store clean and dry away from direct sunlight, heaters and hot cars. Avoid crushing the neoprene or leaving it folded sharply for long periods.
Protect smooth seals and coatings from fingernails, jewellery and scrubbing. Rinse any zip or fastener free of grit, and use only the maker’s approved lubricant where required. Do not machine wash, tumble dry, iron, bleach or use solvents.
Ordering information
May require a special order from Waterproof Sweden, typically taking 4–6 weeks. Confirm your selected size before ordering.









Reviews
There are no reviews yet.