Cressi Korsor Dive Boots 5mm – With Arch Support
The Cressi Korsor Dive Boots 5mm – With Arch Support provide practical foot coverage for diving and watersports. Choose this model for its listed upper, sole and entry design, and check the complete fit with your fins or drysuit socks before ordering.
Features and Details
- Made of soft Nylon-lined Neoprene thick 5 mm
- Reinforced protection for instep and heel
- Flap HydroSeal under the zipper
- Rigid Hi-Grip sole
How the Features Help
- Underfoot support: The sole provides a contact surface between your foot and the ground. Its thickness, tread and stiffness affect walking comfort and how the boot fits inside an open-heel fin.
- Entry opening: A zip opens the upper to help guide your foot in and out. Open it fully when changing and clear sand from the track rather than forcing the slider.
Technical Specs
| Model | Cressi Korsor Dive Boots 5mm – With Arch Support |
|---|---|
| Nominal thickness | 5mm |
| Construction | Made of soft Nylon-lined Neoprene thick 5 mm |
| Material or lining | Made of soft Nylon-lined Neoprene thick 5 mm |
| Entry or fastening | Flap HydroSeal under the zipper |
| Practical details | Reinforced protection for instep and heel |
Fit and Use
Measure both feet using the wall method: stand with your heel against a wall, mark the longest toe and measure the distance in centimetres. Compare the longer foot with the model’s size guide, then try the footwear with your intended socks and fins. Lycra fin socks can help reduce rubbing inside dive boots; allow space for any thicker neoprene socks or drysuit socks.
Additional Product Information
These Cressi Korsor Rigid Dive Boots 5mm is one of the most comfortable dive boot on the market, it is designed to be used with open-heel fins and are made of soft nylon-lined neoprene 5mm, ideal for cooler waters.
Reinforced PU protection for the instep and heel provides resistance against wear and tear. The notch for holding the fin strap is integrated into the heel.
A practical YKK zipper opens at the ankle for easy donning.
Water seepage is reduced to the minimum thanks to a protective thin flap hydro seal under the zip. The Cressi personalized ankle strap has Velcro in the inner part.
A rigid, non-slip and hi-grip moulding covers the entire sole.
Gear Care and Washing
Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash or Revivex Wetsuit Shampoo for compatible neoprene. Regular cleaning helps remove salt, chlorine and everyday residue and, together with thorough drying and proper storage, helps extend your gear’s life. Use the label dilution and follow this product’s care instructions.
Rinse inside and out in cool fresh water after every use to remove salt, chlorine, sand and residue. Gently hand wash when needed with a material-compatible wetsuit cleaner at its specified dilution, following the garment label, then rinse thoroughly.
Clear sand from the soles, zip and foot opening. Open the entry fully and dry the inside as well as the upper; remove an insole only if it is designed to be removable.
Allow both sides to dry completely in the shade with good airflow. Store clean and dry away from direct sunlight, heaters and hot cars. Avoid crushing the neoprene or leaving it folded sharply for long periods.
Protect smooth seals and coatings from fingernails, jewellery and scrubbing. Rinse any zip or fastener free of grit, and use only the maker’s approved lubricant where required. Do not machine wash, tumble dry, iron, bleach or use solvents.




Reviews
There are no reviews yet.