Aqualung XSCAPE 3/4mm Men's Eco-friendly
The XSCAPE uses a Yulex natural-rubber blend with recycled-polyester fabric on its inner and outer surfaces. Flexible 4/3mm panels, a fleece chest section and sealed construction suit active diving, snorkelling and other watersports when this coverage matches your conditions.
Features and Benefits
- Flexible panels: Stretch in the material helps the suit follow shoulder, hip and knee movement. This supports reaching equipment and swimming when the suit is correctly sized.
- Seam construction: Double-glued and stitched; internally sealed. The joins help limit water passage through the panels and support the areas that flex when you move.
- Water control at the openings: Wrist and ankle seals. A close seal reduces the repeated replacement of warmed water with colder water. Check that the seals sit flat and overlap properly with the rest of your exposure gear.
- Practical entry: Back zip with double flap. Open the entry fully before changing and settle the panels into place before closing it. A backing flap or internal barrier, where fitted, interrupts the direct path of water through the zip.
- Inner lining: ThermoShield fleece chest panel. The inner surface adds comfort against the body and works with the suit’s neoprene insulation; let it dry fully between sessions.
- Reinforcement: Supratex knees. These panels help resist everyday rubbing at contact points without requiring the whole suit to use the same tougher outer material.
Technical Specs
| Thickness | 4/3mm panel construction |
|---|---|
| Core | Yulex blend: 85% natural rubber and 15% polymer foam |
| Fabric | Four-way stretch recycled-polyester inner and outer |
| Adhesive | Water-based lamination |
| Lining | ThermoShield fleece chest panel |
| Entry | Back zip with double flap |
| Seams | Double-glued and stitched; internally sealed |
| Seals | Wrist and ankle seals |
| Protection | Supratex knees |
| Supplied | Reusable mesh bag |
| Cut | Men’s |
| Format | Full suit |
Fit and Sizing
Size-guide reference: The attached Aqualung adult wetsuit chart is a general guide. Its match to this exact XSCAPE model has not been confirmed. Ask the DGA team to check the model-specific chart or garment hangtag before choosing a size.
Compare your chest, waist, hips and height with the model’s size guide. The suit should sit closely without restricting breathing or shoulder movement. Settle the panels into place and check for excessive gaps or folds before deciding on a size. Match the thickness and coverage to the water conditions, activity and your own comfort. Warmth depends on fit, exposure time and the rest of your exposure gear.
Gear Care and Washing
After every use, rinse the suit inside and out in cool fresh water to remove salt, chlorine, sand and other residue. Gently hand wash when needed using a wetsuit cleaner suitable for the material, following the cleaner’s dilution instructions and the garment care label. Rinse thoroughly after washing.
Let both sides dry completely in the shade with good airflow. Support the suit on a broad wetsuit hanger, or drape it over a wide support to avoid stretching the shoulders. Store clean and dry in a cool place away from direct sunlight, heaters, hot cars and sharp folds.
Rinse sand and salt from the zip and close hook-and-loop tabs so they cannot snag the fabric. Never force a jammed zip. Use only the zip maker’s specified lubricant and storage position; ordinary wax or silicone is not suitable for every specialist zip.
Do not machine wash, tumble dry, iron, bleach or use solvents. Follow the supplied care instructions for this suit and its zip before using any cleaning or maintenance product.










Reviews
There are no reviews yet.