Zeagle Envoy II Octopus
The Envoy II Octopus brings a straightforward downstream second stage to your alternate-air setup. A Dive/Pre-Dive Venturi control lets you manage the regulator during surface handling, with the final hose routing arranged around your equipment.
Features and benefits
- Downstream demand valve. The conventional second-stage valve provides a straightforward alternate-air component.
- Venturi control. The lever changes airflow assistance inside the second stage. Use the pre-dive setting for surface handling and the dive setting as directed in the manual.
- Accessible alternate air. Arrange the octopus and its hose in a suitable holder so it can be reached and deployed using your trained procedure.
- Visible alternate and long hose. The yellow face identifies the octopus, while its long hose provides room to position the receiving diver during air sharing.
Setup and compatibility
Use as an alternate second stage in a compatible regulator system, with hose routing and stowage matched to your training and equipment.
Care, rinsing and storage
Clean this component as part of a complete, correctly assembled regulator system. After each dive, connect the assembled regulator to a scuba cylinder and open the valve to pressurise the system. Keep it pressurised while fully submerging the first stage, second stages and connected hoses in fresh water. This allows thorough cleaning of the exposed components and hoses while helping prevent water entering the internal air passages, where it can cause corrosion and damage. Keep the cylinder secure throughout cleaning.
For routine cleaning, Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash Neoprene Cleaner 500 mL or Revivex Wetsuit Shampoo 10 oz to help remove salt, chlorine and everyday residue. Dilute according to the cleaner’s label, then rinse thoroughly with fresh water.
Keep the regulator pressurised throughout washing and rinsing. Lift it out of the water and dry the first stage and cylinder connection before closing the cylinder valve, releasing the pressure and disconnecting. Fit the clean, dry dust cap, then allow the regulator to dry in the shade. Store it with the hoses loosely curved, without sharp bends or tension.
Before each dive, inspect the mouthpiece, hoses and connections for wear or damage. Have your regulator serviced by an authorised Zeagle technician at the interval specified in its manual, or sooner if it leaks, is damaged or its breathing performance changes. Leave internal adjustments and repairs to a qualified technician.


Reviews
There are no reviews yet.