TUSA BB React BCD
The BB React brings rear inflation and weight integration into a compact TUSA setup. Its harness and air-cell arrangement give you room across the front of the body, with adjustment and attachment points for organising a recreational diving configuration.
Features and benefits
- Harness support. The REACT design uses TUSA’s Ultimate Stabilizing Harness to support the cylinder against your back. Adjust the shoulder and waist straps over your exposure suit so the complete system remains secure as you move.
- Accessible weight handling. The Advanced Weight Loading System III arrangement keeps removable ballast in dedicated pockets, reducing reliance on a separate weight belt. Check the retention mechanism and keep its release accessible.
- RiteTite cylinder band. The RiteTite buckle helps hold the webbing while you tension the cylinder band, so it is easier to maintain the adjustment as you close the buckle.
- Durable construction. The TPU double-laminated 420D nylon outer adds a protective layer around the air cell, helping it withstand abrasion during regular handling and use.
Fit and configuration
Select the appropriate size or harness adjustment for your body and exposure suit. Choose enough lift for your complete cylinder and equipment configuration. Lift capacity, ballast-pocket capacity and the BCD’s dry weight describe different things; use the size-specific values in Technical Specs when comparing options.
Care, rinsing and storage
After every dive, rinse the BCD, harness, buckles and accessible fittings with fresh water, paying attention to salt and sand around the inflator, dump valves and weight-pocket releases. Follow the TUSA manual’s procedure for the fitted inflation system, including keeping the power inflator pressurised where specified.
Dive Gear Australia recommends Gear Aid Revivex BC Cleaner 10 oz for cleaning the outer surfaces and internal air cell. It helps remove salt, chlorine and residue while conditioning suitable rubber and plastic parts. Use the dilution on the cleaner’s label and follow the equipment manual.
Rinse the air cell internally through the opening specified in the manual, using fresh water and the recommended cleaner dilution when needed. Gently rotate the equipment to reach the inside surfaces, drain through the specified outlet, then rinse until the water runs clear. Drain thoroughly before drying.
Allow the BCD to dry in the shade, then store it slightly inflated in a cool, dry place without tight folds or heavy gear on top. Before diving, check that it holds air and that inflation controls, dump valves, straps and weight releases work correctly. Follow the manufacturer’s service schedule and have leaks, sticking controls or damage checked by an authorised technician.












Reviews
There are no reviews yet.