OceanPro Osprey II F400 Regulator Set
The Osprey II and F400 combine balanced first and second stages in an OceanPro regulator setup. A heat-sink connection and surge-deflecting front cover add useful details for divers looking for a practical, balanced recreational regulator.
Features and benefits
- Balanced diaphragm first stage. The balanced mechanism regulates the supply to the second stage as cylinder pressure falls, helping keep the breathing response consistent through the dive.
- Dry environmental chamber. The sealed chamber keeps water and sediment away from the first-stage spring mechanism and supports resistance to freezing in cold water.
- Balanced second stage. Pneumatic balancing reduces the force needed to open the demand valve, helping the second stage respond smoothly as you inhale.
- Flexible breathing hose. The braided hose bends readily around your equipment, helping reduce tension at the second-stage connection.
- Surge-deflecting cover. The front cover redirects moving water across the diaphragm, helping reduce unwanted valve opening when facing a current.
- Heat exchange. The heat exchanger transfers warmth from the surrounding water to the valve area, helping counter the cooling that occurs as gas expands.
Setup and compatibility
Connection: DIN, Yoke. Choose the fitting that matches your cylinder valve and its pressure rating.
Care, rinsing and storage
After each dive, connect the assembled regulator to a scuba cylinder and open the valve to pressurise the system. Keep it pressurised while fully submerging the first stage, second stages and connected hoses in fresh water. This allows thorough cleaning of the exposed components and hoses while helping prevent water entering the internal air passages, where it can cause corrosion and damage. Keep the cylinder secure throughout cleaning.
For routine cleaning, Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash Neoprene Cleaner 500 mL or Revivex Wetsuit Shampoo 10 oz to help remove salt, chlorine and everyday residue. Dilute according to the cleaner’s label, then rinse thoroughly with fresh water.
Keep the regulator pressurised throughout washing and rinsing. Lift it out of the water and dry the first stage and cylinder connection before closing the cylinder valve, releasing the pressure and disconnecting. Fit the clean, dry dust cap, then allow the regulator to dry in the shade. Store it with the hoses loosely curved, without sharp bends or tension.
Before each dive, inspect the mouthpiece, hoses and connections for wear or damage. Have your regulator serviced by an authorised OceanPro technician at the interval specified in its manual, or sooner if it leaks, is damaged or its breathing performance changes. Leave internal adjustments and repairs to a qualified technician.

HQ Diving Premium Regulator Swivel Adaptor 90°
OceanPro Keppel Octopus Regulator 




Reviews
There are no reviews yet.