OceanPro OP20 Octopus
The OP20 is a straightforward OceanPro alternate second stage with a downstream demand valve. Its surge-prevention cover helps reduce the direct effect of water movement on the diaphragm, making it a practical component for a compatible recreational setup.
Features and benefits
- Downstream demand valve. The conventional valve keeps the alternate second stage straightforward to operate in a compatible regulator system.
- Surge-deflecting cover. The front cover redirects moving water across the diaphragm, helping reduce unwanted valve opening when facing a current.
- Separate alternate air source. The OP20 can be positioned in a suitable octopus holder, with hose routing arranged for your trained air-sharing procedure.
Setup and compatibility
Use as an alternate second stage in a compatible regulator system, with hose routing and stowage matched to your training and equipment.
Care, rinsing and storage
Clean this component as part of a complete, correctly assembled regulator system. After each dive, connect the assembled regulator to a scuba cylinder and open the valve to pressurise the system. Keep it pressurised while fully submerging the first stage, second stages and connected hoses in fresh water. This allows thorough cleaning of the exposed components and hoses while helping prevent water entering the internal air passages, where it can cause corrosion and damage. Keep the cylinder secure throughout cleaning.
For routine cleaning, Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash Neoprene Cleaner 500 mL or Revivex Wetsuit Shampoo 10 oz to help remove salt, chlorine and everyday residue. Dilute according to the cleaner’s label, then rinse thoroughly with fresh water.
Keep the regulator pressurised throughout washing and rinsing. Lift it out of the water and dry the first stage and cylinder connection before closing the cylinder valve, releasing the pressure and disconnecting. Fit the clean, dry dust cap, then allow the regulator to dry in the shade. Store it with the hoses loosely curved, without sharp bends or tension.
Before each dive, inspect the mouthpiece, hoses and connections for wear or damage. Have your regulator serviced by an authorised OceanPro technician at the interval specified in its manual, or sooner if it leaks, is damaged or its breathing performance changes. Leave internal adjustments and repairs to a qualified technician.


Reviews
There are no reviews yet.