Miflex Xtreme coloured LP inflator hoses
Choose a Miflex Xtreme coloured inflator hose when replacing the supply hose on a compatible BCD or drysuit, or changing its length to improve the route around your equipment. The flexible construction helps the hose sit naturally between the regulator and inflator.
Manufactured in Italy, the Xtreme hose uses a polyether-based polyurethane inner liner. Miflex specifies air or nitrox containing up to 40% oxygen; the complete equipment setup must also be suitable for the intended gas.
The range uses a 3/8-inch male first-stage connection and a quick-disconnect inflator coupler. Match the coupler to the actual inflator; integrated alternate-air inflators and specialist connectors may need a different hose.
The listed colours allow you to coordinate your rig and recognise your own equipment. Colour choice does not establish gas contents or compatibility.
Select the length shown in the product options after checking the route while wearing your equipment. You should be able to reach and move the inflator comfortably without creating a loose trailing loop.
A compatible spare hose can be useful for a dive trip, with replacement and testing carried out by a qualified technician. Keep spare connections clean and protected. Inspect the installed hose for wear, especially near the fittings.






Reviews
There are no reviews yet.