Apeks AT20 US4 & AT20 Occy Regulator Sets
The AT20 and US4 package keeps a warm-water regulator setup straightforward. A balanced second stage, Venturi control and Comfo-Bite mouthpiece provide the core features you need for recreational diving, with the matching octopus completing the listed set.
Features and benefits
- Balanced diaphragm first stage. The US4 balances the first-stage mechanism to regulate the supply as cylinder pressure changes.
- Balanced second stage. Pneumatic balancing reduces the force needed to open the demand valve, helping the second stage respond smoothly as you inhale.
- Venturi control. The lever changes airflow assistance inside the second stage. Use the pre-dive setting for surface handling and the dive setting as directed in the manual.
- Comfo-Bite mouthpiece. The silicone palate bridge supports the second stage with less need to clench your jaw, which can make longer dives more comfortable.
- Warm-water configuration. The US4/AT20 system is intended for water above 10°C, making it a straightforward option for suitable warm-water diving.
- Visible alternate air source. The yellow hose and cover make the octopus easier to distinguish from your primary regulator when locating and deploying it.
Setup and compatibility
Connection: DIN, Yoke. Choose the fitting that matches your cylinder valve and its pressure rating. Intended for warm-water use above 10°C.
Care, rinsing and storage
After each dive, connect the assembled regulator to a scuba cylinder and open the valve to pressurise the system. Keep it pressurised while fully submerging the first stage, second stages and connected hoses in fresh water. This allows thorough cleaning of the exposed components and hoses while helping prevent water entering the internal air passages, where it can cause corrosion and damage. Keep the cylinder secure throughout cleaning.
For routine cleaning, Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash Neoprene Cleaner 500 mL or Revivex Wetsuit Shampoo 10 oz to help remove salt, chlorine and everyday residue. Dilute according to the cleaner’s label, then rinse thoroughly with fresh water.
Keep the regulator pressurised throughout washing and rinsing. Lift it out of the water and dry the first stage and cylinder connection before closing the cylinder valve, releasing the pressure and disconnecting. Fit the clean, dry dust cap, then allow the regulator to dry in the shade. Store it with the hoses loosely curved, without sharp bends or tension.
Before each dive, inspect the mouthpiece, hoses and connections for wear or damage. Have your regulator serviced by an authorised Apeks technician at the interval specified in its manual, or sooner if it leaks, is damaged or its breathing performance changes. Leave internal adjustments and repairs to a qualified technician.

HQ Diving Premium Regulator Swivel Adaptor 110° 


Reviews
There are no reviews yet.