Apeks THERMIQ ADV 8/7mm Semi-Dry Wetsuit Men’s XXL

The ThermiQ ADV combines an 8mm torso with 7mm limbs, an attached hood and a semi-dry chest opening. Its internal cuffs, water dam and sealed seams work together to reduce flushing, while cargo pockets and the changing mat support the practical side of gearing up.

Features and Benefits

• Flexible panels: Stretch in the material helps the suit follow shoulder, hip and knee movement. This supports reaching equipment and swimming when the suit is correctly sized.
• Seam construction: Liquid-sealed. The joins help limit water passage through the panels and support the areas that flex when you move.
• Water control at the openings: Internal forearm and lower-leg seals; fused edges. A close seal reduces the repeated replacement of warmed water with colder water. Check that the seals sit flat and overlap properly with the rest of your exposure gear.
• Practical entry: Semi-dry chest zip with internal water dam. Open the entry fully before changing and settle the panels into place before closing it. A backing flap or internal barrier, where fitted, interrupts the direct path of water through the zip.
• Inner lining: Graphene-containing lining and fleece at torso and hood. The inner surface adds comfort against the body and works with the suit’s neoprene insulation; let it dry fully between sessions.
• Reinforcement: Spine pad, nonslip shoulders and Supratex knees. These panels help resist everyday rubbing at contact points without requiring the whole suit to use the same tougher outer material.
• Accessory storage: Cargo pockets with internal bungee loops. This gives small accessories a dedicated place rather than leaving them loose. Use the attachment points provided and check that stored items do not press through the material.

Technical Specs

Fit and Sizing

Compare your chest, waist, hips and height with the model’s size guide. The suit should sit closely without restricting breathing or shoulder movement. Settle the panels into place and check for excessive gaps or folds before deciding on a size. Match the thickness and coverage to the water conditions, activity and your own comfort. Warmth depends on fit, exposure time and the rest of your exposure gear.

More About This Model

A highly efficient 8mm on the core provides extra thermal protection where it is needed most and 7mm on the arms and legs allows for flexibility. Large cargo pockets are ideal for stashing your accessories and an integrated hood provides additional warmth. An across the chest zipper makes it easy to put on, while internal cuffs on the forearms and lower leg minimize water ingress.

The Thermic 8/7 is supplied with a simple and effective change mat to protect your feet and wetsuit while getting changed . The mat doubles up as a shoulder bag to carry your wet gear inside, featuring a drawstring closure, shoulder straps, and aluminium G-Hook closure for extra security.

Tough double layer heavy-duty polyester provides protection for your wet or dry suit when changing on rough ground.

Gear Care and Washing

Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash or Revivex Wetsuit Shampoo for compatible neoprene. Regular cleaning helps remove salt, chlorine and everyday residue and, together with thorough drying and proper storage, helps extend your gear’s life. Use the label dilution and follow this product’s care instructions.

After every use, rinse the suit inside and out in cool fresh water to remove salt, chlorine, sand and other residue. Gently hand wash when needed using a wetsuit cleaner suitable for the material, following the cleaner’s dilution instructions and the garment care label. Rinse thoroughly after washing.

Let both sides dry completely in the shade with good airflow. Support the suit on a broad wetsuit hanger, or drape it over a wide support to avoid stretching the shoulders. Store clean and dry in a cool place away from direct sunlight, heaters, hot cars and sharp folds.

Rinse sand and salt from the zip and close hook-and-loop tabs so they cannot snag the fabric. Never force a jammed zip. Use only the zip maker’s specified lubricant and storage position; ordinary wax or silicone is not suitable for every specialist zip.

Do not machine wash, tumble dry, iron, bleach or use solvents. Follow the supplied care instructions for this suit and its zip before using any cleaning or maintenance product.