Oceanic Alpha 8 Regulator Yoke
Keep your recreational setup simple with the Oceanic Alpha 8 and SP-5 first stage. The yoke connection suits matching cylinder valves, while the Alpha 8’s integrated purge and orthodontic mouthpiece provide familiar controls and a comfortable hold.
Features and benefits
- SP-5 piston first stage. The conventional sport-piston layout supplies the Alpha 8 through a straightforward first-stage mechanism.
- Downstream second stage. The demand valve supplies gas as you inhale, with a familiar design and uncomplicated controls.
- Accessible purge. The large purge button is easy to locate and press when clearing the second stage, including when wearing gloves.
- Mouthpiece comfort. The shaped silicone mouthpiece supports a comfortable, secure hold without adding unnecessary bulk at the mouth.
Setup and compatibility
Connection: Yoke. Choose the fitting that matches your cylinder valve and its pressure rating.
Care, rinsing and storage
After each dive, connect the assembled regulator to a scuba cylinder and open the valve to pressurise the system. Keep it pressurised while fully submerging the first stage, second stages and connected hoses in fresh water. This allows thorough cleaning of the exposed components and hoses while helping prevent water entering the internal air passages, where it can cause corrosion and damage. Keep the cylinder secure throughout cleaning.
For routine cleaning, Dive Gear Australia recommends Cressi Neoclean Wetsuit Wash Neoprene Cleaner 500 mL or Revivex Wetsuit Shampoo 10 oz to help remove salt, chlorine and everyday residue. Dilute according to the cleaner’s label, then rinse thoroughly with fresh water.
Keep the regulator pressurised throughout washing and rinsing. Lift it out of the water and dry the first stage and cylinder connection before closing the cylinder valve, releasing the pressure and disconnecting. Fit the clean, dry dust cap, then allow the regulator to dry in the shade. Store it with the hoses loosely curved, without sharp bends or tension.
Before each dive, inspect the mouthpiece, hoses and connections for wear or damage. Have your regulator serviced by an authorised Oceanic technician at the interval specified in its manual, or sooner if it leaks, is damaged or its breathing performance changes. Leave internal adjustments and repairs to a qualified technician.










Reviews
There are no reviews yet.