Cressi Gara Turbo Impulse modular freediving fins
The Turbo Impulse combines detachable technopolymer blades with shorter foot-pocket rails. Flexible side channels guide water while leaving the blade room to bend through the kick.
Choose the pocket size with your intended socks. Cut the insoles only as directed and inspect the blade fixings before use. The modular design allows compatible components to be replaced.
Cressi Gara Turbo Impulse — available sizes
Size guide: EU 36/37, 38/39, 40/41, 42/43, 44/45 and 46/47; available options vary by product.
Use the Gara Turbo pocket and the actual size selected. Gara Modular Impulse/Sprint complete-fin measurements are not interchangeable with Turbo measurements.
The shaped Rondine blade tips complete the blade profile, and the screw-and-side-clip attachment lets you replace matched components.
Size and fit
Try the pockets with your intended fin socks. Foot width, instep and sock thickness affect the fit. Lycra or 3 mm neoprene socks can help reduce rubbing; allow for their thickness. Your heel should stay secure without curled toes or pressure across the instep.
To measure your feet, place paper against a wall and stand with your heel gently touching the wall. Mark your longest toe and measure from the wall to the mark in centimetres. Measure both feet and use the longer measurement when asking us for fitting advice. A shoe-size label does not confirm the fit.
Assembly may be required: Your fins may arrive with the blades and foot pockets packaged separately. Watch our step-by-step fitting video below for assembly guidance. Fixing hardware and fitting steps may vary by model.
How to Fit Cressi Gara Modular Foot Pockets
This video demonstrates Cressi Gara Modular foot-pocket fitting. This product uses the Gara Turbo system, so use the correct compatible blade, pocket and fixing parts and follow the supplied Cressi instructions; rail and mounting details may differ from those shown. Check that the assembly is securely retained before use.
Care, rinsing and storage
Rinse in fresh water after use, including the pockets and blade attachments. Clear trapped sand and dry in the shade. Store with the blades supported, without bending them or putting heavy gear on top. Inspect pockets, rails and fixings before diving, and follow the matching blade-and-pocket assembly instructions when replacing parts.
Technical Specs
| Model | Gara Turbo Impulse |
|---|---|
| Design | Modular long-blade full-foot fins |
| Blade material | Elastomerised technopolymer |
| Pocket material | Multi-compound thermoplastic rubber |
| Blade-to-pocket angle | 29° |
| Insoles | Pair of trim-to-fit Gara Modular insoles included |
| Blade tip | Shaped Rondine profile |
| Blade attachment | Matched screw and side-clip interface |












Reviews
There are no reviews yet.