Atmos Mission Extension Strap
The Mission Extension Strap is designed to fit the Mission One and Two Dive Computer. The Extension Strap provides approximately 1.5 – 2 inches of additional strap length, so the wearable computer can be worn over a diving drysuit or wetsuit.
Mission Extension Strap Features
- Extend the existing strap to provide 1.5 to 2 inches of additional length
- It fits the Mission One & Two dive computers
How the Features Help
- Fit over exposure wear: The strap or extension changes how the compatible instrument fits around your wrist or suit. Check the attachment points and leave enough adjustment for the exposure protection you use.
Compatibility and Use
Match the exact instrument model, generation, part number and attachment arrangement before ordering. Listed compatibility applies to the identified accessory, not every product from the same brand. Check the supplied items and follow the instrument’s installation or service procedure.
Gear Care and Maintenance
Rinse after diving to remove salt, chlorine and grit. Clean gently by the strap maker’s method, using only a material-compatible mild product where permitted, then rinse thoroughly.
Dry the fabric or silicone fully in the shade before storage. Inspect buckles, pins, quick-release fittings and bungee cord for wear, and keep the strap away from sharp edges, solvents and direct heat. Refit attachment hardware only as the instrument instructions require.


Reviews
There are no reviews yet.